Skip to main content
BookPhysio.in
BackPost-Surgical Rehab

Birmingham Hip Resurfacing (BHR): Young Active Bone Preservation and High-Impact Return

By BookPhysio.in Editorial Team•3 min read

In short

Hip resurfacing caps the femoral head rather than amputating the femoral neck. Learn bone preservation in young athletes, metal ion monitoring, and return to high-impact sports.

Physiotherapist coaching an active adult on progressive hip loading following Birmingham hip resurfacing
In this guide (5 sections)

The Philosophy of Hip Resurfacing

Standard Total Hip Arthroplasty (THA) amputates the entire femoral head and neck, inserting a long titanium stem down the intramedullary femoral shaft. In young, highly active athletic males (under 55), conventional THA carries higher revision risks due to lifetime mechanical wear.

Pioneered by Derek McMinn in Birmingham in 1997, the Birmingham Hip Resurfacing (BHR) procedure preserves the native femoral head and neck: the damaged articular surface of the femoral head is sculpted and capped with a high-carbide cobalt-chrome metal cap, articulating within a matching metal acetabular cup.

Preserving proximal femoral bone stock and natural femoral head diameter (~50 mm) virtually eliminates post-operative dislocation risk and allows for future standard THA conversion decades later if ever needed.

Patient Selection: The Ideal Candidate Profile

BHR is not suitable for all hip arthritis patients; strict patient selection criteria dictate long-term surgical success.

Patient Selection Criteria for Birmingham Hip Resurfacing (BHR)
Patient ParameterIdeal BHR Candidate ProfileContraindication / Poor CandidateClinical Rationale
1. Biological SexYoung active males (< 55-60 years old)Females (especially postmenopausal)Higher failure and adverse reaction rates in smaller female anatomy.
2. Bone Mineral DensityNormal T-score (durable, non-osteoporotic bone)Osteopenia or osteoporosis (T-score < -1.5)Weak bone risks femoral neck fracture under the metal cap.
3. Femoral Head AnatomyNormal femoral head size (> 48 to 50 mm)Small head (< 46 mm) or extensive avascular cystsSmall bearings generate higher edge-loading wear.
4. Renal FunctionCompletely normal kidney function (eGFR > 60)Renal impairment or chronic kidney diseaseKidneys must efficiently clear microscopic cobalt and chromium ions.

Rehabilitation Protocol and Bone Healing Timelines

The primary structural risk in the first 6 to 12 weeks post-op is femoral neck stress fracture before the bone beneath the cemented cap adapts to altered load lines.

  • Phase 1: Protected Weight-Bearing (Weeks 1 to 6): Walk with two crutches at 50 percent partial weight-bearing; avoid all twisting, impact, or high torque to protect the healing femoral neck.
  • Phase 2: Progressive Full Weight-Bearing (Weeks 7 to 12): Transition to one crutch, then unassisted walking as bone remineralization is verified on radiographs; begin stationary cycling and swimming.
  • Phase 3: Impact Loading and Running (Months 6 to 12): Unlike standard THA where running is often discouraged, successful BHR patients can return to high-impact activities (running, martial arts, squash) after 6 to 12 months.
  • Serum Metal Ion Monitoring: Annual blood testing for serum cobalt and chromium ion levels (safe threshold < 7 ug/L) to monitor for adverse local tissue reactions (ALTR / pseudotumors).

Sports Re-Integration in Young Indian Men

BHR is sought by young active Indian executives and recreational athletes who refuse to abandon running, cricket, or martial arts.

Physiotherapists guide phased return-to-sport testing, emphasizing hip abductor power, pelvic alignment, and gradual impact loading.

Frequently Asked Questions

Can I run marathons after a Birmingham Hip Resurfacing?

Yes. One of the primary attractions of BHR for young men is that high-impact activities (marathon running, competitive tennis, triathlon) are permitted once bone maturation is complete at 12 months, whereas conventional THA surgeons generally advise against repetitive running.

What is the dislocation rate after BHR?

The dislocation rate after BHR is exceptionally low (< 0.2 percent), because the large 50 mm prosthetic head matches the patient natural anatomical femoral head size, requiring extreme displacement before dislocating.

What causes a femoral neck fracture after hip resurfacing?

The bone of the femoral neck is subjected to altered stress lines. If an unconditioned patient jumps or twists abruptly during the first 6 to 8 weeks before bone remodeling is complete, an acute femoral neck fracture can occur.

Clinical SpecialtyOrthopaedic Physiotherapy
Explore Orthopaedic specialty guides →

Related condition guides

BookPhysio.in Editorial Team

The BookPhysio.in editorial team writes and maintains this content, checking it against reliable clinical sources. Content follows our medical review policy: general information only, and no page claims a clinical review until a named registered physiotherapist has signed it off.

Read our medical review policy

Was this page helpful?